top of page

Geodesic 4-Way (1/2 inch)

In stock
Product Details

These custom designed hubs become the base connectors at the ground level for all the 1/2" PVC domes. They’re injection molded with a 10 degree inward curvature.

Each arm has exactly one inch of sleeve room for the inserted pipe. All the hubs have a predrilled bolt hole 1/2" into each arm. You have the option of either gluing the pipes into the hubs, or securing them with nuts and bolts.

When you start to build your groundbase level, make sure you place the flat side of the 4-Star hub down, with the two open arms pointed straight up, and the curvature facing inward. If you are using a strut-length calculator, be sure to subtract 2.28 inches from vertex to vertex.

Save this product for later

WARNING: This product can expose you to chemicals including Styrene and/or Vinyl Chloride, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to

bottom of page