Internal Snap Adaptor-Male

SKU 213-M
$0.00
Out of stock
1
Product Details

Fits inside a 3/4 inch Schedule 40 PVC fitting. Designed to be used with 213-F to create a mechanism to snap a 3/4 inch fitting to a 1 inch PVC pipe for a tight connection, but one that is not permanent. The advantage to this is that the 3/4" fitting will be flush with your 1 inch PVC pipe once the assembly is together. Also, it makes it easy to break down your project for storage and rebuild again without needing glue or screws.

Please take note: this fitting is not designed to handle loads. The item might break if too much pressure is applied to the snap portion of the fitting.


Save this product for later
p65-warning18.png

WARNING: This product can expose you to chemicals including Styrene and/or Vinyl Chloride, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.