Slip Cross (1/2 inch)

SKU 131-F SLIP
$1.09
In stock
1
Product Details
CALL for other COLORS (1-877-762-7782)

The “Sliding Cross” PVC fittings (aka pass through or slip cross) are commonly used in building PVC structures where you don’t want to compromise the strength of the pipe by cutting it. With no stops in one direction of the cross, you can easily slide it onto the pipe where you want it. These work well for the ridge of arched greenhouses because the pipe will pop out of a normal cross when it is bent. If you want to fix them permanently after they are set in place, they can be glued or put a self tapping screw through the fitting into the pipe. All outlets are non-threaded sockets and are compatible with furniture grade PVC pipe or standard PVC pipe from a hardware store. Furniture Grade means this fitting has a non-marked, glossy finish.

Save this product for later
p65-warning18.png

WARNING: This product can expose you to chemicals including Styrene and/or Vinyl Chloride, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.